Call Today for a FREE QUOTE: (042) 3526-0305 / 0300-8422644

Geomembrane Sheet Price in Pakistan

In 2026, 0.5 mm HDPE sheet is estimated at Rs. 23–80 per square foot. Choosing a liner for a farm pond, canal or industrial basin also depends on what it will hold, how it will be supported and how the panels will be joined on site.

Liner panels laid across the bed and sloping banks of a Shahzada containment project

HDPE geomembrane sheet price per square foot

2026 estimated sheet supply rates in Pakistani rupees.
Liner specificationRs. per sq ft
0.5 mm HDPE23–80
0.75 mm HDPE28–130
1.0 mm HDPE30–149
1.5 mm HDPE38–170+
2.0 mm HDPE58–190+
LDPE / LLDPEQuoted to your specification
A plus sign means the rate can exceed the upper figure shown. Freight, installation and seam testing are priced for the site.

What is a geomembrane, and which liner fits the site?

A geomembrane is a low-permeability sheet used to control seepage. In an irrigation reservoir, the sheet covers the bed and banks. Individual panels are joined into a continuous lining, including around pipes and at concrete structures. These connections matter as much as the choice of sheet.

Smooth HDPE

High-density polyethylene panels can be welded across large pond beds and containment areas. When comparing grades, identify the stored liquid, whether the liner will be exposed, and the thickness required by the design.

Textured HDPE

Surface texture increases friction at the contact with an adjacent layer. Where a slope design calls for texture, the drawing should identify which face needs it and which material touches that face. Single- and double-sided sheets are quoted separately.

Flexible polyethylene liners

LLDPE can follow changes in contour where the designer needs a more flexible polyethylene sheet. For LDPE or LLDPE, submit the named polymer, thickness and quantity so the quotation matches the specified material.

PVC geomembrane

Flexible PVC can follow shelves, bends and transitions in a shaped basin. Shahzada manufactures PVC geomembrane in Pakistan. Tell us what liquid the liner will hold and whether it will be covered so we can review the formulation for that use.

Where geomembrane liners are used in Pakistan

Farm reservoirs and fish ponds

An agricultural pond liner helps retain irrigation water between filling and use. For a fish pond, identify the aquaculture use when requesting a grade. Include inlet and outlet locations, working water level and bank slopes on the pond sketch.

Canals and watercourses

A canal liner follows the bottom and both banks. To estimate coverage for a uniform reach, multiply its length by the distance measured down one lined bank, across the bed and up the other bank. Measure bends, transitions and anchor details separately.

Wastewater and industrial containment

For an effluent lagoon, identify the liquid, its concentration and operating temperature so material compatibility can be reviewed. Include sumps, pipe crossings and concrete edges on the drawings because each requires a lining detail.

Landfill cells

A landfill lining system can combine a geomembrane barrier with cushioning and drainage layers. The cell drawings specify layer order, slope interfaces and seam testing. Use that specification when comparing sheet and installed rates.

How thickness and protective layers affect the price

Thickness is one part of the material specification. For example, two offers for 1.5 mm HDPE can cover different surfaces, quantities or delivery terms. Compare offers against the same drawing and check whether the price is per square foot of supplied sheet or per square foot of finished lining.

Ground conditions also affect the lining system. A designer may specify nonwoven geotextile fabric to cushion the liner against rough bedding or cover material. Shahzada supplies polypropylene and polyester geotextiles in Pakistan. Where cushioning is required, include its specified weight or puncture resistance as a separate item in the enquiry.

HDPE pond liner installation and seam testing

Shahzada manufactures the liner and provides HDPE pond liner installation in Pakistan. After the supporting surface is prepared, the crew places the panels, welds the seams and completes penetrations and perimeter details.

Different tests answer different questions. An air-pressure test checks the channel between two weld tracks. A vacuum box checks suitable local seams and repairs for leaks. Peel and shear tests use a cut seam sample to assess the strength of the weld. Testing and repair locations are planned against the project specification.

Where the sheet meets concrete, a design may call for an HDPE E-Lock embedment strip to provide a weldable edge. A PVC Water Stopper serves a different purpose inside a concrete joint. Identify each detail on the drawing so it is included in the correct part of the estimate.

Shahzada technician guiding a seaming machine along overlapping liner panels
Field welding joins individual liner panels into a continuous barrier.

How to request a comparable liner quotation

Send the site location, application, liner specification and delivery date. For a pond, include the top and base dimensions, depth and anchor detail. The water-surface area alone leaves out the banks, panel overlaps and perimeter anchoring.

If your drawings use square metres, multiply the sheet area by 10.764 to estimate square feet before applying the table rate. Ask for sheet supply, protective layers, freight, welding and testing as separate amounts. That gives you both the material budget and the installed cost for the same design.

Request a liner quote