HDPE E-Lock / Poly Lock Concrete Anchor System
PolyLock is an extruded HDPE concrete embedment strip used for attachment Shahzada Industries geomembrane in Pakistan. PolyLock is a rugged, durable HDPE product which has the ability to be cast-in-place or inserted into wet concrete.The embedment of anchors provides a high-strength mechanical anchor to the concrete allowing a much stronger grip and high resistance to pulling forces but recommended to be installed by Shahzada Industries professional technicians. When properly installed and utilized with shahzada Industries geomembrane, PolyLock provides an outstanding barrier to leakage and a tight seal. It is ranked as the most effective and economical cast-in-place mechanical anchor system for HDPE Geomembrane liner manufactured by Shahzada Industries.
Features of PolyLock:
♦ Rounded anchor fingers for extra strength.
♦ Superior leakage barrier
♦ Most effective Anchor system in the market
HDPE E-Lock / Poly Lock Manufactured in Pakistan
Shahzada Industries manufactures and supplies HDPE E-Lock, also known as Poly Lock or PolyLock, for geomembrane projects across Pakistan. This extruded HDPE concrete embedment strip provides a strong mechanical connection between an HDPE geomembrane liner and a concrete structure.
E-Lock / Poly Lock can be cast into wet concrete so its anchor profile becomes securely embedded in the structure. The exposed HDPE welding surface allows a compatible geomembrane liner to be attached by qualified technicians, creating a durable liner termination at the concrete interface.
Typical E-Lock / Poly Lock Applications
HDPE E-Lock / Poly Lock is used where a geomembrane liner must terminate against or connect securely to concrete. Typical applications include:
- Water and wastewater containment structures
- Concrete tanks, channels, sumps, and pits
- Industrial containment systems
- Lined concrete walls and foundations
- Landfill and environmental containment structures
- Other HDPE geomembrane-to-concrete connections
Final product selection and installation details should be based on the structure, liner material, site conditions, and project design.
E-Lock / Poly Lock Installation
The anchor profile is positioned before or during concrete placement so that its anchoring section becomes embedded in the concrete while the HDPE welding surface remains accessible. After the concrete and liner areas are ready, the geomembrane is welded to the exposed Poly Lock surface by trained installation technicians. The connection is inspected as part of the completed lining system.
Shahzada provides an end-to-end service covering geomembrane manufacturing and supply, site preparation, liner installation, welding, and seam testing.
Part of a Complete Shahzada Lining System
Shahzada manufactures and supplies HDPE geomembrane liners and concrete anchoring products for integrated containment projects. Using compatible materials and experienced installation teams helps create a coordinated system from material selection through final installation and testing. For concrete protection applications, explore Shahzada HDPE StudLiner and anchor-sheet systems.
Frequently Asked Questions
Are E-Lock and Poly Lock the same type of product?
E-Lock, E Lock, Poly Lock, and PolyLock are commonly used names for an HDPE concrete embedment profile that creates a weldable connection between HDPE geomembrane and concrete. Project profiles and dimensions should always be checked against the design requirements.
Does Shahzada manufacture E-Lock / Poly Lock in Pakistan?
Yes. Shahzada Industries manufactures and supplies E-Lock / Poly Lock for geomembrane and concrete containment projects in Pakistan.
How is a geomembrane attached to Poly Lock?
The Poly Lock profile is embedded in concrete, leaving an accessible HDPE surface. A compatible HDPE geomembrane is then welded to that surface by trained liner-installation technicians.
Can Shahzada install the complete liner system?
Yes. Shahzada provides end-to-end geomembrane services, including liner manufacturing and supply, site preparation, deployment, welding, air-pressure testing, vacuum-box testing, and peel/shear testing as applicable to the project.
Request an E-Lock / Poly Lock Quotation
Send the project location, required quantity, available drawings or connection details, geomembrane type and thickness, and installation requirements for review.
Request a quotation
