HDPE E-Lock / Poly Lock Manufacturer in Pakistan
Shahzada Industries manufactures and supplies HDPE E-Lock, also called Poly Lock or PolyLock, for geomembrane-to-concrete connections. The profile is embedded in concrete and provides an accessible HDPE surface for welding a compatible liner.
What E-Lock / Poly Lock does
E-Lock is an extruded HDPE concrete embedment strip used where an HDPE geomembrane must terminate against or connect to concrete. The anchoring profile becomes mechanically embedded during concrete placement while the weldable surface remains exposed.
One product, several common names
E-Lock, E Lock, Poly Lock and PolyLock are commonly used names for this type of HDPE concrete anchor profile. The required profile and project detail should always be checked against the approved design.
Geomembrane-to-concrete connection process
The embedment and welding sequence should be coordinated before concrete placement so the connection remains accessible to the liner-installation team.
- 01
Position the profile
Locate the E-Lock according to the approved concrete and liner detail before or during concrete placement.
- 02
Embed in concrete
The anchor section is cast into the concrete while the HDPE welding face remains available at the interface.
- 03
Weld and inspect
A compatible HDPE geomembrane is welded to the exposed profile by trained technicians and the completed connection is inspected.
Typical E-Lock / Poly Lock applications
Water and wastewater structures
Concrete tanks, channels, sumps and pits that connect to an HDPE lining system.
Industrial containment
Concrete edges and interfaces within lined process or secondary-containment structures.
Environmental containment
Landfill and civil works where liner terminations meet designed concrete components.
Walls and foundations
Other engineered HDPE geomembrane-to-concrete connections shown in the project drawings.
Installation as part of the complete lining system
Shahzada can coordinate E-Lock with geomembrane manufacturing, HDPE liner supply and field installation. Services can include site preparation, liner deployment, welding and applicable air-pressure, vacuum-box and peel/shear testing.
Review geomembrane installation and testing →
Part of a coordinated Shahzada lining system
E-Lock should be selected with the concrete detail, liner material and installation sequence in mind. For concrete protection systems rather than liner terminations, review Shahzada HDPE StudLiner and anchor sheet.
Frequently asked questions
Are E-Lock and Poly Lock the same type of product?
E-Lock, E Lock, Poly Lock and PolyLock are commonly used names for an HDPE concrete embedment profile that creates a weldable connection between HDPE geomembrane and concrete.
Does Shahzada manufacture E-Lock / Poly Lock in Pakistan?
Yes. Shahzada Industries manufactures and supplies HDPE E-Lock / Poly Lock for geomembrane and concrete containment projects in Pakistan.
How is a geomembrane attached to Poly Lock?
The profile is embedded in concrete with an accessible HDPE surface. A compatible HDPE geomembrane is then welded to that surface by trained liner-installation technicians.
Can Shahzada install the complete liner system?
Yes. Shahzada provides end-to-end geomembrane services, including liner manufacturing and supply, site preparation, deployment, welding, air-pressure testing, vacuum-box testing and peel/shear testing as applicable to the project.
Request an E-Lock / Poly Lock quotation
Share the concrete connection detail, quantity, liner material and thickness, site location, schedule and installation scope.